ID00M (IDUM Custom Firmware)

Free

Get it on the resources page →

Free firmware - no account and no checkout. Flash it right in your browser from the resources page.

Category:

ID00M is a free community firmware for the Mystic Circuits IDUM, based on Eli Pechman’s v.99 and released under the same license (CC BY-SA 4.0). It keeps everything IDUM already does and adds bug fixes, new modes and options, and a few opinionated changes to how some modes behave. As far as I know it’s the first public custom IDUM firmware ever shipped. If you’ve spotted any inconsistencies, bugs, or have any suggestions, feel free to reach out through my Support page.

Flash it to your IDUM here: https://00modular.com/id00m/resources/

ID00M github repo: https://github.com/Mr-V1ct0r/id00m

New features
  • Per-channel clock multiply / divide: the headline. Each of the four channels can run its bursts and bouncing balls at its own rate: ÷4 ÷3 ÷2 ×1 ×2 ×3 ×4 ×8. So every drum voice can ratchet or bounce at a different speed against the same clock. This is the long-requested “ch1 ×1, ch2 ×2, ch3 ×4, ch4 ×8” idea. Set it on a dedicated page-3 editor, reached by flipping the CYCLE switch while you’re in the page-2 menu.
  • Linear drumming (one-voice-at-a-time). An optional output filter: when two channels would fire at the same instant, only the highest-priority one passes. Priority is editable per channel. Turns dense chaos into a tight, hocketed groove.
  • MERGE: OFF / ADD / CUT / MIX. Every stock IDUM mode replaces your incoming triggers with its own output, a big part of why IDUM feels destructive. MERGE lets a mode instead ADD to the input (keep your hits, layer the mode on top) or CUT it (keep your hits, but subtract / re-gate them where the mode fires). Set it in the secondary menu at ring slot 5 (solid LED 5 = active; the loop LED blinks the state). It only applies to the four “movement/pattern” modes: ROTATE, DELAY, BREAK, SCATTER (the last four ring slots). The trigger-anchored modes (HOLD, BURST, RATCHET, BALL) always replace: they’re already built around your incoming triggers, so ADD would just double the input and CUT would work against the mode rather than with it.
    • OFF: stock replace everywhere.
    • ADD: all four eligible modes layer on top of your input. Notably, ADD on DELAY is a true echo (your dry hit plus the delayed one), the dry+delayed echo people always asked for. (Rotate/break/scatter likewise become “input + the effect.”)
    • CUT: affects ROTATE and BREAK only. They subtract from / re-gate your input (hocket; pattern-gated holes in the beat). DELAY and SCATTER are unaffected by CUT: they stay on plain replace (CUT isn’t musically useful on them).
    • MIX: a combination of MERGE behaviors at once. DELAY/SCATTER ADD, ROTATE/BREAK CUT.

    Note: MERGE currently affects live playing, not loop playback (a later refinement).

  • Break pattern banks. A second bank of 16 break patterns: grooves based on clave and world rhythms.
  • Break speed multiplier. Run the break patterns at 1× / 2× / 3× / 4×.
  • Factory reset. Hold REMOVE MODE while powering on to wipe back to defaults.
  • Split mode can now “freeze” PARAM. Click the split menu slot once for split, twice for split + freeze (a third click turns it off). With freeze on, the PARAM knob is snapshotted the instant each channel starts a modification and held for its duration, so in split mode you can dial a different PARAM (and mode) into each of the four channels by moving the knob as they trigger, instead of all four tracking the live knob. This was a hidden, source-only “secret option” in stock IDUM; ID00M puts it on the menu, shown by a blinking loop LED at the split slot (the ring LED stays solid for split; the loop-LED blink means freeze is engaged). Because each channel commits to one setting per modification instead of everything morphing with the live knob, freeze tends to settle the output, a handy way to tame the chaos when you want it a bit more composed. Heads-up: with freeze on, turning PARAM mid-modification does nothing until the next one. That’s the point, not a fault.
Changed mode behavior
  • SCATTER replaces CLOCK SKIP in the purple slot: it randomly nudges triggers off-grid to a quantized sub-slot of their own gap.
  • Burst, counter-clockwise is now probabilistic thinning (it randomly drops incoming triggers) instead of the old slow clock-divide echo.
  • Ratchet, counter-clockwise is now a true trigger divider (passes 1 of every N trigs) instead of an interval-stretch that was effectively inaudible on a steady beat.
  • Delay: a proper monotonic delay now. How it used to work: a bipolar knob whose two halves scaled differently, with each of the four channels hard-wired to a different divisor (÷8 / ÷12 / ÷14 / ÷16) that even swapped between the knob’s two halves, so the four outputs were artificially fanned apart and the knob was more of a lucky-dip than a straight short→long control. And because ÷12/÷14/÷16 aren’t clean eighths, the shifted hits landed on mismatched, non-musical fractions of the gap, never lining up to a tidy grid (Eli’s own comment calls them ratios that get “sort of close to actual beats”). Now: one clean sweep, CCW = short (an eighth of the beat) up to CW = long (a full beat), where every shifted hit snaps to a clean, quantized subdivision of the gap (n/8, or the pow2 / even subset you pick in the resolution menu), and all four channels share the same grid (the per-channel fan is gone; spread now comes from feeding them different inputs). The delay is a fraction of each channel’s own input gap, so it stays proportional as the tempo changes, and it’s capped at one full gap so a delayed hit never overruns and swallows the next trigger. It shifts each hit later rather than adding a dry copy. For a “dry+delayed echo”, use MERGE ADD on this mode (see MERGE, above).
  • Bursts stay crisp at high multiplication: the trigger pulse width now scales with the subdivision, so fast ratchets don’t smear together into one sustained gate as readily.
  • Boot indicator: ID00M lights the first and last ring LEDs together (a “00” signature) for about a second at power-on, so you can tell at a glance the module is running ID00M and not stock.
How to get MORE out of your IDUM - [ID00M overview + deep dive]

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.